mechanical In Die Tapping Units "by IEM" - ME1024

product features

The ME1024 is a compact tool with a small mounting surface for tapping downward in a mechanical or hydraulic press. The ME1024 utilizes a cam driver to control tool acceleration. The ME will tap sizes up to M5 and typically runs at production rates between 60–100 strokes per minute (SPM).

Part Number: R-001002

The maximum SPM rate is based on strip material, tap size and pitch. The cam driver is designed as a separate piece to maximize die design fl exibility and transfer the mechanical press motion to a rotary tapping motion. The cam driver mounts easily on a punch plate or upper die shoe above the tapping tool. The cam driver is application specifi c; contact your IEM sales reprresentative for design assistance.

notes:

• The ME1024 tapping tool can be used in a mechanical or a hydraulic press
• Maximum tapping depth / material thickness data can be found on the table

A = Height equals tapping stroke length plus 146.71       B = Shut height

C = For 5.00mm dowel pin or #10 SHCS 

Request a quotation